Search for: All records

Abstract Large-eddy simulations (LES) are an important tool for investigating the longstanding energy-balance-closure problem, as they provide continuous, spatially-distributed information about turbulent flow at a high temporal resolution. Former LES studies reproduced an energy-balance gap similar to the observations in the field typically amounting to 10–30% for heights on the order of 100 m in convective boundary layers even above homogeneous surfaces. The underestimation is caused by dispersive fluxes associated with large-scale turbulent organized structures that are not captured by single-tower measurements. However, the gap typically vanishes near the surface, i.e. at typical eddy-covariance measurement heights below 20 m, contrary to the findings from field measurements. In this study, we aim to find a LES set-up that can represent the correct magnitude of the energy-balance gap close to the surface. Therefore, we use a nested two-way coupled LES, with a fine grid that allows us to resolve fluxes and atmospheric structures at typical eddy-covariance measurement heights of 20 m. Under different stability regimes we compare three different options for lower boundary conditions featuring grassland and forest surfaces, i.e. (1) prescribed surface fluxes, (2) a land-surface model, and (3) a land-surface model in combination with a resolved canopy. We show that the use of prescribed surface fluxes and a land-surface model yields similar dispersive heat fluxes that are very small near the vegetation top for both grassland and forest surfaces. However, with the resolved forest canopy, dispersive heat fluxes are clearly larger, which we explain by a clear impact of the resolved canopy on the relationship between variance and flux–variance similarity functions. 

Abstract Simulating the influence of heterogeneous surfaces on atmospheric flow using mesoscale models (MSM) remains a challenging task, as the resolution of these models usually prohibits resolving important scales of surface heterogeneity. However, surface heterogeneity impacts fluxes of momentum, heat, or moisture, which act as lower boundary conditions for MSM. Even though several approaches for representing subgrid-scale heterogeneities in MSM exist, many of these approaches rely on Monin–Obukhov similarity theory, preventing those models from resolving all scales of surface heterogeneity. To improve upon these residual heterogeneity scales, a novel heterogeneity parameterization is derived by linking the heterogeneous covariance function in spectral space to an associated homogeneous one. This covariance function approach is subsequently used to derive a parameterization of the aerodynamic resistance to heat transfer of the surface layer. Here, the effect of surface heterogeneity enters as a factor applied to the stability correction functions of the bulk similarity approach. To perform a first comparison of the covariance function approach against the conventional bulk similarity and tile approaches, large-eddy simulations (LESs) of distinct surface heterogeneities are conducted. The aerodynamic resistances from these three parameterizations are subsequently tested against the LES reference by resolving the surface heterogeneities with six different test-MSM grids of varying cell dimension. The results of these comparisons show that the covariance function approach proposed here yields the smallest deviations from the LES reference. In addition, the smallest deviation of the covariance function approach to the reference is observed for the LES with the largest surface heterogeneity, which illustrates the advantage of this novel parameterization.